Videos

Rust Repair Channels & Patches

Welding Tips

Window Trim & Hardware

Setting Your Glass

Running Your Bead

So, you have prepped your glass for setting (cleaned and placed the dam tape), cut your Urethane nozzle to form the “V” shaped bead, but you are a bit tentative.  Not, to worry, here is a quick tip – place the nozzle guide on the glass edge and with a gloved hand secure and guide the nozzle tip with your index finger.  Begin to squeeze the caulking gun trigger (USE ONLY A HEAVY DUTY 13:1 LEVERAGE) as you move the tip around the glass.  Always dry fit your glass with your trim to ensure the height is right first and read our step-by-step written instructions with your glass install kit – you got this!